Jump to content

Inny

2006 Rev.03 Clutch Removal

Recommended Posts

I've finally got round to removing the clutch on my lad's bike prior to replacing the perforated clutch case. Before I do, can anybody enlighten me on removing the retaining clip shown on the attached photos? Is it a case of just bending the 2 lugs back prior to using a 22mm socket? If that's the case, I assume a new clip will need fitting afterwards. Are there any tips on re-installing this before I mess anything up? Also, I can't find a part number on the Beta website for this clip - does anybody know this and where I can find one in the UK?

Many thanks in advance for any advice. Everybody's been a great help so far.

IMG_20201124_120831.jpg

IMG_20201124_120846.jpg

Share this post


Link to post
Share on other sites
 

Looks to me like it's just a tab lock washer, I usually just carefully tap them out using a wide flat screwdriver, depending on how many times its been done over the years you should be able to use the same washer. You will know if it's weak because it will pry up easily.

  • Like 1

Share this post


Link to post
Share on other sites
 

That's what I was thinking but just wanted to make sure. If it needs replacing, will it be a standard item or Beta specific?

Thanks

Dave

Share this post


Link to post
Share on other sites
 

Provided it’s in sound condition when you remove it, you can re-use it. If not, the part number is 2774760 000 (at least that’s it for an Evo and I’d be surprised if the Rev3 is any different).

  • Like 1

Share this post


Link to post
Share on other sites
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...