ksv Posted December 14, 2020 Report Share Posted December 14, 2020 Hi, I've just bought a second hand GasGas (2020 GP 300) and want to remove the front light to put a number board on. I don't have a wiring diagram so I wanted any advice on how easy it is to remove safely without impacting any of the other electricals. Thanks Kirk Quote Link to comment Share on other sites More sharing options...
arnoux Posted December 14, 2020 Report Share Posted December 14, 2020 Kirk there is a plug on the headlight wires, just undo that and you are good to go. You wont need it, but you can download the owner's manual, and the electrical schematic is on page 41. 1 Quote Link to comment Share on other sites More sharing options...
the dabster Posted December 15, 2020 Report Share Posted December 15, 2020 as arnoux has said, cut the zip ties securing the light and follow the wire back into the loom at the headstock. you could remove the tank for clarity. Just pull the plug at the first connector and seal the connector with electrical grease. Great bike the 300 GP. Quote Link to comment Share on other sites More sharing options...
crop.thumb.jpg.a454e5aac9b06a216e237f375d999419.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.