SwiftyM Report post Posted January 1 Hi, Could any one recommend someone that I can take a fibre glass tank to for resealing. Many thanks Andy Quote Share this post Link to post Share on other sites
ikb Report post Posted January 2 If you can find the aluminium tank that goes under the shelter on the earlier models it can be made to fit into your fibreglass tank. Just cut out the bottom with a hacksaw blade then the aluminium tank will drop in with a little reshaping and glue it in with builders foam or silicone. Then you end up with a nice sturdy unit that’s full petrol proof. Quote Share this post Link to post Share on other sites
turps Report post Posted January 3 I bought a two part sealer (Petseal) from Ebay, pretty easy to do yourself. Quote Share this post Link to post Share on other sites
dr nosh Report post Posted January 4 I have a spare alloy petrol tank, and a fibre glass cover, not specifically for 200 but might well fit. Any use? PM me some pictures and I will look to see if they (tank and cover) are likely to fit. Quote Share this post Link to post Share on other sites
SwiftyM Report post Posted January 6 On 1/3/2021 at 9:14 AM, turps said: I bought a two part sealer (Petseal) from Ebay, pretty easy to do yourself. Hi, I've looked up Petseal on eBay, but is this not for steel tanks as it states rust. Can this be used on fibreglass tanks, cheers Andy Quote Share this post Link to post Share on other sites
turps Report post Posted January 12 I used it on mine, seems ok but not used the bike much since doing it due to the lockdown. Quote Share this post Link to post Share on other sites
