Jump to content

torque setting for clutch springs gas gas


harryowens2
 Share

Recommended Posts

 

If that model has the standard 6 springs with the small bolt through the center of the spring, If I remember correctly the torque setting is actually quite low.

but I don't remember an exact number.

I did find for a Sherco, that the torque for the clutch spring screws is 0.7Nm (0.516 FT/LB or 6.2 IN/LB)

http://shercousa.com/pdfs/Workshop_Manual.pdf  Page 4 of 60.  in the PDF

I know it is a different brand, but the clutch design may be similar enough that the torque is similar as well.

image.png.5612dfa9a5356e5451d5ce4a96189364.png

 

Link to comment
Share on other sites

 
 
38 minutes ago, lineaway said:

 That is a good way to break a basket that might be hard to replace. Being spring loaded they only need to be snugged up and just barely a small bit more.

6 IN/LB is just snugged up and just barely a small bit more.

Link to comment
Share on other sites

 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...