Jump to content

Crank shaft seals


rileys
 Share

Recommended Posts

 

 
 
17 hours ago, bullylover said:

It will be the 4 seals from In Motion you need. Insert these seals back to back so they face in different directions. I always have the spring side facing towards the out side of the seal carrier on both sides of the carrier.

Thanks guys. It was confusing because there was only one fitted again thank you

  • Like 1
Link to comment
Share on other sites

 

If you look closely at the old seal you will find it is a double lipped seal. The new ones are only a single lipped seal which is why you need two of them facing in opposite directions. The old one is about 14mm wide and the new single ones are 7mm wide.

 

  • Like 1
Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...