Lee halsall Posted March 2, 2021 Report Share Posted March 2, 2021 Just received the correct tank for my 116 , hasn’t had fuel in for a long time and I need to line the inside . I’m thinking of using caswell . A few people have suggested rattling screws about to key the glass fibre , I’m ok with that but not sure what to use to get the inside grease free , I imagine the rough glassfibre interior will be oily from the petroil mix , long since evaporated . Any suggestions ? Quote Link to comment Share on other sites More sharing options...
delberto Posted March 2, 2021 Report Share Posted March 2, 2021 i used acetone to rinse my sherpa fibreglass tank before coating and its still holding up well, its had fuel in it for 10 months and no sign of breaking down. i think it was flowliner i used. cheers Quote Link to comment Share on other sites More sharing options...
Lee halsall Posted March 2, 2021 Author Report Share Posted March 2, 2021 Thanks , Acetone dissolves GRP are you sure that’s what you used ? Quote Link to comment Share on other sites More sharing options...
delberto Posted March 2, 2021 Report Share Posted March 2, 2021 59 minutes ago, Lee halsall said: Thanks , Acetone dissolves GRP are you sure that’s what you used ? yes if you leave it on too long it will, im only talking about rinsing with it. it evaporates quickly. 1 Quote Link to comment Share on other sites More sharing options...
Lee halsall Posted March 2, 2021 Author Report Share Posted March 2, 2021 How did you find flowliner to use ? I can’t find a supplier that doesn’t want £16 for delivery to AB556ST. So I’m a bit p****d about that . Quote Link to comment Share on other sites More sharing options...
Lee halsall Posted March 29, 2021 Author Report Share Posted March 29, 2021 On 3/2/2021 at 7:04 PM, delberto said: yes if you leave it on too long it will, im only talking about rinsing with it. it evaporates quickly. Went through a litre of acetone and it was still coming out brown . The tank must have been left with two stroke mix for years and it’s evaporated leaving the oil . I think another litre and it will be clean enough to coat . Quote Link to comment Share on other sites More sharing options...
Divouneh Posted August 29, 2021 Report Share Posted August 29, 2021 Same subject: what are you using in the US as liner coating ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.