Jump to content

2011 sr280 Fuel hose


rick1962uk
 Share

Recommended Posts

hi im just refreshing the scorpa for a trial soon but noticed the fuel hose is rock hard and shrunk so going to replace but tank side has a 90 degree bend and looks tight to the tank has anyone used straight hose and got away with it many thanks rick

Link to comment
Share on other sites

 

 

I've got an SR 280 - fine bike, does all I need. Removing/replacing tank is a bit fiddly due to fitting fuel pipe to petcock where outlet points inwards. Could swap for one where outlet points downwards so pipe is easily detached, easily and at low cost.

 

Link to comment
Share on other sites

 
  • 2 weeks later...

Many thanks got it sorted droped the carb inlet a bit used 5mm fuel pipe for trials bikes and it went rond realy well ONE WORD OF WARNING to anyone with black pipe the new E10 fuel had eaten it alive the inside has rotted away almost filling the fuel filter

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...