Tiewrap Posted January 5, 2022 Report Share Posted January 5, 2022 Hi, in the exploded view u can see part 12 and it seems to me that the piece with the nut is on the inside. On my bike it does not fit that way, only with the nut on the outside to get enough clearance for the brake lever. Anyone has an (2016) that can have a look ? Also there is a "powerbox" in the front under the air filter. According the drawings it is in a rubber grommet. I assume it is a bit confusing and must be the grommet of the ECU. So is the powerbox in a rubber grommet ? Quote Link to comment Share on other sites More sharing options...
bikerpet Posted January 5, 2022 Report Share Posted January 5, 2022 My 2020 has the brake pivot setup as shown. The lever is right up against the frame. Works fine. My 2017 was the same from memory. 1 Quote Link to comment Share on other sites More sharing options...
lowbrow Posted January 5, 2022 Report Share Posted January 5, 2022 Hi Tiewrap, my 2020 is the same as yours and not as shown in the diagram. Bushing #12 is installed with its hexagon end against the frame, then the pedal is fitted and secured by a large washer and lock nut. Quote Link to comment Share on other sites More sharing options...
Tiewrap Posted January 6, 2022 Author Report Share Posted January 6, 2022 Interesting, wil have a look at some others. Curious where the difference is in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.