Jump to content

Sherco ST 300 Factory (MY22) 2022 - Faulty header


domb
 Share

Recommended Posts

Hi all, I've just picked up my Sherco ST 300 factory yesterday put it away without having a proper look over it, got it out this morning fired it up and let it sit for a while to warm up, I noticed after a short while that the residue off the combustion was coming out of the welds on the header, surely this should be covered under some kind of warranty? The quality of the welds are pretty shocking as seen in the included photos. Thanks in advance guys & gals!

 

 

332160506_IMG_0558Large.thumb.jpeg.8c93c08ff189810399bb26492a844261.jpeg1541017917_IMG_0554Large.thumb.jpeg.9891d445f0234d786e5e5fbdd03b6dd5.jpeg1372469447_IMG_0556Large.thumb.jpeg.49871b30666d761a53e676e44d565127.jpeg178627694_IMG_0555Large.thumb.jpeg.09f84b3d9f0647152d8119d939967886.jpeg

Edited by domb
Link to comment
Share on other sites

 

Show the photos to whom you bought the bike from. Perhaps take the bike to whom you bought it from.  They can see for them selfs what cobbed up welds look like.    Too hot in one place, too cold it another, welded too fast in one area, too slow in another.    nasty looking.

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

 
 
 
 

Last year riding buddy of mine bought a 2021 Beta 200 rr. waited long time to get it.  He filled up the gas tank, went to the house to put his gear on. Came back to garage chomping at the bit for his 1st ride, There was gasoline all over the floor. Lucky the wood stove was out and cold. The beta factory used much too long bolts to anchor the radiator shrouds, They poked holes in the gas tank !!  This was at the peak of the covid mess in Italy. I do wonder if Beta was hiring anyone they could find to assemble-------  just a uneducated guess on my part.

  • Like 1
Link to comment
Share on other sites

 
 

Thanks all for your input, Ive spoke to the dealer who is sending me a new header out in the post, I spent the time yesterday stripping the bike down and checking everything over, gave everything a check with a torque wrench, greased everything up because from factory, it’s as if they’ve forgot what grease is. I’ll be keeping hold of my 2016 factory for a little while longer, just incase anything else goes wrong. I’m assuming covid has had a lot to play in the quality drop but who knows. 

Link to comment
Share on other sites

 
33 minutes ago, domb said:

…from factory, it’s as if they’ve forgot what grease is.

I thought this was a thing across most manufacturers? Didn’t Danny Butler make a comment about it on one or more of his recent TrialTube videos?

 

Good news about the new header. Hopefully everything goes back together properly!

  • Like 1
Link to comment
Share on other sites

 
 

Actually, A beta 200 RR is really 190cc.   A KTM 150 is really 143.9 cc same as the husky.   its just a selling point i suppose.  agan, the beta 200 rr i am talking about is a enduro type bike. not a trials bike. I am happy Mr Domb has had great results with his seller. 

  • Like 1
Link to comment
Share on other sites

 
 
 

Header has arrived quality is better than the previous one, I've included some photos, may finally be able to get out on it this weekend... that's if this British weather will allow it :D 

IMG_0614.thumb.jpeg.01d6a17512faf7acd22212060e5d133b.jpeg

IMG_0615.thumb.jpeg.d67ce2ea5a2646c591948cbfc0241ac7.jpeg

IMG_0616.thumb.jpeg.72d3f6ad20287f1f4a810cee157243de.jpeg

 

Thanks for all the input very much appreciated!

  • Like 1
Link to comment
Share on other sites

 

Good luck with the new pipe. If you keep the original, maybe a local tig welder can clean it up and you have a spare for the inevitable dents?

 

All the same, I feel inclined to say my ‘16 ST300 has much nicer welds than even that replacement. Shame to see the standards drop, especially in such a small market like trials. 

  • Like 1
Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...