Ldfab Posted March 24, 2022 Report Share Posted March 24, 2022 Looking for an engine cover for jtr 125 clutch side as the alloy around hydraulic clutch has pulled out does anyone have one lying around or know where I can get one from please? Quote Link to comment Share on other sites More sharing options...
d2w Posted March 25, 2022 Report Share Posted March 25, 2022 Or try this: 1) Clean the remaining case thread well. 2) Clean the hollow/"banjo-bolt" well. 3) Lightly heat the bolt and apply a thin coating of paraffin (aka candle) wax to the threads. 4) Mix well some J-B Weld epoxy. 5) Apply the epoxy to the threads and insert into the case. 6) Once the epoxy cures you should be able to extract the bolt, and reassemble. The tricky bit is to only retighten the bolt to seal the hydraulic oil but not destroy the epoxy threads. I suggest using a fresh/new set of copper crush washers to maximize your chance of getting a good seal. Dale 1 Quote Link to comment Share on other sites More sharing options...
Bilko Posted March 25, 2022 Report Share Posted March 25, 2022 GASGAS trials bike JTX JTR CONTACT TXT 250 270 280.CLUTCH COVER/WATER PUMP SHAFT | eBay Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.