Jump to content

Engine/gearbox oil 250 2t 2009 evo


McTrucky
 Share

Recommended Posts

On searching for "what oil...?"  I expected a raft of opinions and an equal number of "not this again..!" responses. But alas no.  So here goes...

 

The manual says Bradahl 20w40.  I have tubs of Shell Ultra 4t 10w40 (fully synthetic, top of the range shell bike oil) - is there any reason not to use the Shell?  Hot viscosity will be as recommended, cold viscosity slightly thinner than the 20w40, but that is probably a good thing for cold starting.

I can understand the logic of using a gearbox oil rather than an engine oil (such as no compromises for catalytic converters etc), but the manual does specify a multigrade.

Pretty sure it is easy to over think such things, but any opinions on this?

Link to comment
Share on other sites

 

 
 

Might as well try the Shell since you've got it.

It's partly a matter of preference with how the clutch feels. If you get to much drag with the Shell then Putoline Nano Trans, Motul 300v and ATF all get recommended, I've tried all three and prefer to use Nano Trans in my 2012 250.

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...