lowside Posted June 2, 2023 Report Share Posted June 2, 2023 (edited) I've just popped a new air filter into my Sherco as part of its wash and brush up. The old one was pretty dreadful. It's my first time oiling and installing one. These bikes have a frame to mount the filter on, so I'm fairly confident I've done it correctly, but it's hard to be certain. Removal was a real pain as it's so small inside the airbox, in my frustration, I didn't note the orientation. I would like to be sure that I've installed it correctly. It's a Twin Air and there is a single seam at the top on my install (shown in pic). It's on the frame and clipped in. Looks OK, but I can't see the underside. Pic attached. Does this look right, with the space at the top revealing the allen bolts, seam at the top? I am not sure the flap and the aluminium are standard, can anyone confirm please? Just a nervous noob... Many thanks. Edited June 2, 2023 by lowside Quote Link to comment Share on other sites More sharing options...
lowside Posted June 3, 2023 Author Report Share Posted June 3, 2023 Resolved. It's seam side up for the Twin Airs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.