HI Guys
I have a Beta Evo 300 4t 2011
I have been having an issue with the gear selector.
When I shift up a gear the selector sticks at the top and doesn't move down unless i give it a tap.
I have moved the selector with my hand and there is no resistance when pushing it up and only gravity pulling it back down to a neutral position. If I push the selector down the spring seems push's it back up.
Could a broken arm on the spring be causing this? If so how hard is it to r
Got it all Sorted now!
Thanks for the help
I took the drain plug off to prepare it for disassembly and found the spring arm attached to it....
Ended up having to take the entire side case off. got the selector shaft off and swapped the spring.
Should be all good now.