Introduce Yourself

Got a 2018 Montesa 260 4RT pulled it out of the garage last week & it kicked over first time let it run for 10 minutes, turned it off then kicked it over It started 1st time again let it run for a bit and ooking at the tacho it was running at over 2000 rpm so I turned the screw in a touch so it was running nicely at about 1850rpm at the same time I tucked the wiring that runs from the ignition behind the clip under the regulator...... turned it off then when I came to restart it wouldn’t start, did the reset, still wouldnt start so I looked at that wiring from the ignition & took off some loose electrical tape & pulled it out from…

Hi, I'm a new member and looking for somewhere I can trial in Wiltshire. Anybody have any suggestions?

I'm trying to re-build an Aprilia Climber 240cc from a load of bits I bought off ebay. Why? I hear you cry! In truth I'm not really sure, it started off as a project when I bought the frame. Me and my son were going to make it into something together. Then I got hold of the original engine, and now I'm kinda hooked on trying to get it back to an original state. Fact is, I'm several bits missing, and spares for this beast are expensive. For one, the coil is missing. A new one is

Salam Alekum! New to trials and the forum, so would like to say howzitgaun! From Scotland but living in Abu Dhabi now. Almost mid 30's, engineer.... absolute trials novice! Bought a trials bike to improve my bike skills, especially enduro. Lover of all things two-stroke also. Was never allowed a bike when I was young, came into road riding as a 21yr old direct access rider, moved into off-roading in 2009. Now living in UAE, riding consists of trackdays and riding off-road. Moved up to a 300 EXC for the dunes, basic skills are ok but need to learn some proper skills to enjoy it get the best out of off-roading. Just bought my first bike..... 2007 Gas Gas 250 TXT Pro f…

Hello all I have just joined I have just acquired an Ariel 350 single 1939-45 prefix number RBH which I believe was a Royal Air Force dispatch - Engine crank gearbox needs attention but unfortunately frame and rest has rusted beyond any amount of TLC - I am presently considering a trials rebuild and looking at using the 350 crank with a 500 barrel - I came across a post on here by a guy called Magnon back in 2009 which read -(see below) - So what interests me is - does anyone know who he was referring to regarding the ally barrel maker he knew off that will suit the std conrod (85mm stroke) and Yamaha xt350 piston (86mm). THANKS Davedent Hi Bob, h…

Allo folks, I'm the proud new owner of a 2000 gas gas 280, and pretty new to trials in general, had a Fantic 245 about 5 yrs ago, had it about a month befor it got pinched, I did manage to get out and make a complete abortion of an event I entered, the term " WOBBLER" didn't even come close to describing how bad I was.. Anyway I live in Essex, train driver on the underground and part time Tattooist, got loads o kids.. usual stuff... Looks like a good site with some good caractures,, lok forward to speaking to you all Justin

After years of wanting a trials bike I got one a couple days ago. It needed some work but I finally got it running and have rode around the yard a bit. Tomorrow is the first real ride. We will see. I have ridden and raced for many years but never attempted trials. I am excited to give it a go.

Hi can you help? I have just brought a Armstrong 250 with a Hiro sammy miller engine and i need some parts. I have tried the web but with no joy. Martin

Hi my names Arthur and I'm new to trial bikes, in fact any bikes. Bought a 2003 Sherco 250cc the bike ran great the first couple of learning sessions but now it starts no bother when on full choke but when choke is put off the engine dies I have tried keeping it revving for a while but it still dies when you let the throttle off. orry I don't know muck about the mechanics of a bike but am keen to learn and your help would be much appreciated in solving this problem guys.

Hi Group, Nipper from Australia and trying to fond Robin Luscombe and Walt Bullock. I met Robin on the IoM a couple of weeks back but would like to find his email address to correspond once back home. I'd also like to find Walt Bullock and old pen pal of years ago. I'd appreciate any contact on both these issues please. My kindest regards Nipper

Hi newby to trials and have just purchased a 97 Beta Techno Dougie Lampkin. Been riding road and trail bikes for a while now and wanted to refine my enduro balancing skill set. Im not a 2 smoke expert so this will be challenging adaptation to different power delivery etc. Looking forward to this and have a million questions to ask from suspension setting for a 83kg guy to what is the prefered oil fuel mix, gear oil, chain and sprocket combo, or do i just shut up and ride it....thanks if you have read this far.. toodle pip.

Hi I'm new to the trials scene I have just acquired an Ossa MAR 1972 mark1, it's in reasonable condition for its age and appears to be original and in unmolested condition. I am looking for sources of parts particularly in Australia. At the moment I need a new front axel & front fork springs & rebound spacers. Any help will be received with open arms. I have looked at some overseas web sites for the springs, most of them say will fit except for MAR Thanks ausy steve

Ow do the names rich I'm 28 and from wakey, just wanted to say hello to the forum. Been out of the biking scene for a while due to work and family commitments but I've scraped together 2k and I am currently seeking a decent starter bike for a novice rider. My first bike way back when I was 11, was a Yamaha Ty 250 and even though it was far too big and powerful for me I had many years of fun on it . It was also by far the most reliable bike I've ever owned. Since then I've owned a few motocross bikes (all Honda ) all of which were very fun, they also cost me a bob or two in maintanance and repair . So anyway decided to go back to my roots of trials and I'm very excit…

Hi I am looking to do some green lanes etc as well and was wondering does anyone know of an app the you can down load that has these routes/maps cheers

Hi my name is Charlie, I am from Bournemouth and 50 something Looking to buy a bike not sure wether to go b40 or bantam b14/4 i am a beginner rider and concerned that the b40 may be to heavy to learn and gain experience on i am looking to build up a road bike to trials spec as a project for the winter months i know people will say it’s a money pit, but I am not trying to win anything and am just doing it for fun and to keep me busy during the winter months, not to bothered about what it costs but obviously don’t want to waste money and it doesn’t need to be competitive i rebuilt a Gp2 beach buggy a couple of years ago and I have just finished …

hi my name is leggins. after a nice long break from trials ( 25 years ) i have decided to have another go now my kids have all grown up. i am looking for some advice on what bike to go for or what to aviod . thanks

Hi, surprised my account was still active its been a while ? I decided after 12 years away from trials it was time to get back on a bike. My last trial was in 2006 and sold my Beta back in 2007 due to divorce and a massive change in my life, needed to free up cash. Im in Lincolnshire and used to be in the RAFMSA, now a civvy so joining the North Lincs Club at their next trial which Im planning to ride. With help from my dad we managed to get a 2006 Rev3 270 and still had my riding gear other than boots and helmet, sorted those now..cant wait to ride again ?

Hi to everyone on the forum. Just been looking for trials bits and bobs and came across the forum. I've not ridden for about 18years, used to ride schoolboy trials in the 80's and 90's. I've seen Chris Hanan's name mentioned and Shirty Jnr who I used to ride with. Used to ride for Sheffield and Hallamshire. Just bought a gasser 280 and will be riding first trial on Sunday at Barnsley if I can remember how to ride, not had any practice!!!!!.

Greetings all: I just joined, just picked up a GasGas 200 last night, and I am ready to ride! I rode a '77 Cota 123 back when it was new, and and haven't been motorcycling at all since 1980. Long story; my dad was working with the west coast Montesa distribution in the states, Martin Belair worked there and introduced me to the sport. We rode all over southern California, Santee and Barona and Saddleback, and even the Orange County Fair. Anyhow, after way too long away from the sport, both my brother and I are jumping in feet up. If anyone out there communicates with Martin, tell him Damon Barda says hi, and thank him for giving me a passion for this sport so SO long …

Hello all, I'm new to Trials Central and just wanted to say hello from Rochester, NY. I rode trials in the mid-to-late 70s as a kid, and am now thinking of getting back into the sport. I have a 13-year old son who is showing great interest in trials, and we recently went to a vintage meet near here to watch. For most of the last 20+ years, I have had a Bultaco Sherpa T 250 and a Honda TL-125 in storage in my garage. I am now working to get them back in working condition. They only need some minor work (gummed carbs, cables freed up, etc.). It's great to see the interest in vintage bikes after all these years! I hope that I can get a tip or two from the knowledgeable folk…