September 27, 200718 yr Hi there, having recently acquired a 1989 JCM 240, I am in search of anyone who can supply spares for this bike, as i,m having a little difficulty, any info would be greatly appreciated...
September 27, 200718 yr Hi there, having recently acquired a 1989 JCM 240, I am in search of anyone who can supply spares for this bike, as i,m having a little difficulty, any info would be greatly appreciated... There is a classified section accessible from the front page of the site.
September 30, 200718 yr Hi there, having recently acquired a 1989 JCM 240, I am in search of anyone who can supply spares for this bike, as i,m having a little difficulty, any info would be greatly appreciated... If '89 was the 233 "vega", I used to own one - excellent bike. Just in case it helps, I had lots of trouble with the clutch slipping, until I replaced the springs with GasGas equivalents. As for parts, I assume you know Trail 70, Joel Corroy's shop in Vesoul, France ?
October 25, 200718 yr Hi there, having recently acquired a 1989 JCM 240, I am in search of anyone who can supply spares for this bike, as i,m having a little difficulty, any info would be greatly appreciated... Hello i have a 1983 JCM 323 and have found that the front and back sprokets of a air cooled TS185 fit .front fork seals you can find the size with a set of Venires and wheel bearings and then search weemotos site or talon sprokets. Clutches can be re lined at saftek bonding. Hope this is of some help in you. Most motorbike parts are interchangable so all you have to do is try it Against Other peoples bikes
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.