February 11, 200818 yr I am preparing a TLR 200 for trials use and need a new chainset. Please tell me what sprockets you are using. The BJ Racing site quotes a 10T front combined with a 50T rear sproket. Does this sound right?
February 11, 200818 yr I use 9-44 , used to use 13-44 and seccond was un-usable and first would stall most of the time ! I can now use 1st 2nd and 3rd in the sections. Edited February 11, 200818 yr by honda_tlr
February 11, 200818 yr Be careful, honda_tlr's is probably a UK bike, I'm pretty sure they have different internal gear sets than US versions. I use BJ's ratios and find them to be slightly on the low side but a good match for the stock engine.
February 26, 200818 yr Hello from FRANCE, The best for me => 9x48 in 520 chain or 13x58 in 428 chain! regards.
February 26, 200818 yr Author Thanks for the info I have gone with a 9x47 combination (cos that's all I could get hold of!)
February 26, 200818 yr Thanks for the info I have gone with a 9x47 combination (cos that's all I could get hold of!) How do you find it ?
February 29, 200818 yr Author Gearing not too bad, first is a tad low but OK for very tight turns on grippy surface. second good for most sections, third for climbs with long run up or a muddy slot. It is the gaps between gears that is the problem not the final ratio. In short OK for most conditions
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.