How to you drain the gear oil in a sherco 125 2007 because it doesn't have a bolt on the bottom

There's a small Allen bolt on the left hand side behind the gear lever.

I think it's the same on the later ones.... Someone may correct me there!

If it is the same place this will show you

http://www.sherco.com/wayne/Sherco_Setup_and_Lubrication_Guide.pdf

Edited December 14, 201213 yr by tazz229

Thanks fro that's really helpfull now I've just got to get some more oil.

You may know u my not but what ratio of petrol and oil do you use

80:1 12.5ml of oil per litre of fuel

Some people go a little leaner but 80:1 is a good starting point. My mate has a Sherco and uses the same...

Edited December 14, 201213 yr by tazz229