February 17, 201412 yr Having a tough time getting the linkage apart.Any tips from those in the know? Edited February 17, 201412 yr by ric h
February 18, 201412 yr Ric what part are you struggling with? I just stripped and regreased them on Saturday morning, spring washers were te only tough part, mainly because my pliers are crap other than that seemed pretty straight forward Edited February 18, 201412 yr by canada280i
February 18, 201412 yr Author The small pivot shaft right under the swingarm pivot is being stubborn.Tap it out with a drift maybe?
February 18, 201412 yr the one held into a tube with two internal spring clips ? mine was very tight, it took fair bit of force to get it out
February 18, 201412 yr Yes, it is a tight fit, I had to drift mine like JSP says with quite a bit of force to get it moving but once goig just slid out.
February 19, 201412 yr I don,t think so, if it helps I drifted mine from the right side to the left as you sit on the bike and reinserted the same way, from right to left, only because I found it easier to get to tat way
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.