April 6, 201412 yr Hello all any body any idea what the jet sizes and needel should be for the mikuni carb? For the 198A
April 7, 201412 yr Hi Bondy. I`d give In Motion a ring and ask them as they sell Mikuni`s for Bultaco`s. For those who don`t know a M 198 A is a 1979ish 250 Sherpa T. These were the all blue ones with black fork bottoms and the first ones with no frame tubes under the engine. Over here they were the 1979 model and the last ones to come over to Australia. We didn`t get the M 199/8 B`s. All of the ones over here were imported privately.
April 7, 201412 yr Author Hi thaks sorry I didnt put the model off the bike its 2 bikes really both 250s 1 is the 198A the other 198B id off both would be jeted the same?however I have put an Amal carb on the 198A since it runs alot beter but would like to use the mikuni on my 198B.
April 7, 201412 yr Mine came from in motion and was spot on jetting from the word go. Motocarb in Liverpool also do them jetted to suit
April 7, 201412 yr Author Hello stue you any idea what size they are? I can give inmotion a call I just though some body would know.
April 11, 201412 yr Author Hello stue got the jet sizes from inmtion ive not tryed the bike yet to busy with other stuff
April 13, 201412 yr Bondy, Here are my jet sizes Mikuni VM26.. VM26 2.0 slide 130 main jet 35 pilot jet 5DP7 needle O8 needle jet
April 14, 201412 yr Author Hello stue cheers mate I got them from inmotion I put a Amal on the 198B runs good with the Amal but thats for my 198A so ive rejeted the mikuni and will try it. Bondy
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.