How do I  fit a kill switch to my 1972 Bultaco T 250

 

any ideas ?

 

Mick

Use a two wire kill switch, 1 to ground, 1 to coil/mag @ junction terminal.

 

That's about all there is to it.

 

Have a nice day

 

Larry  

cheers Larry

1 wire if you use the original bultaco kill button earth is on the metal bracket that clamps round the bars singal wire gose to coil.

Make sure you have a good earthy return to the engine. I fitted a kill switch to my Ossa Gripper. riding round the garden, I decided to test the kill switch. Because the earthing was bad(current trying to go through the head bearings), it earthed through me instead, throwing me off the bike! I fitted a wire from the bars to the engine to cure that one.

Thanks for the tips, there is no kill switch at all on the bike at the moment. just though i would put one on for safety.

 

waiting for my new helmet before I go out on the bike.

 

Mick