March 23, 20179 yr No continuity from front to back of my plug cap. Anything special about the MTA cap. 2009 Sherco 290ST Am not getting spark and have tried a known good stator. I do see spark when I place the HT lead without cap near ground and push on the kick starter. What would be a suitable replacement cap here in the USA??? Thanks Steve
March 24, 20179 yr I do not recall there being anything special about them other than a 5K resistor. Ebay here we come! http://www.splatshop.co.uk/spark-plug-cap.html Edited March 24, 20179 yr by copemech
March 24, 20179 yr Author Thanks All - Discovered a few things Auto parts stores in my area do not carry the appropriate part. Found a great replacement at my favorite Yamaha dealer. The cap was not my problem - my testing procedure was at fault. Now to change the coil as it is the last part in my NO SPARK issue. Borrowing a known good one from a friend - Already swapped the stator and disconnected the kill switch. Again - Thanks for the help Steve
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.