farmer58za Posted August 11, 2020 Report Share Posted August 11, 2020 I have a good friend in South Africa who has a Greeves 250 Anglian (Frame No. 24THSA...) The original swingarm bolt has been replaced with a piece of Metric threaded bar. I've done a bit of reading on the 'Net and what I have managed to find is that the Anglian swingarm pivot bolt is 5/8" UNF. Is that correct? Thanks in advance Quote Link to comment Share on other sites More sharing options...
greevesrob Posted August 13, 2020 Report Share Posted August 13, 2020 (edited) Hi the swingarm pin on later greeves are 5/8 not sure on thread. I found it easier to open the hole up to 16mm and hand thread the ends. The gra may be better for more advice Edited August 13, 2020 by greevesrob Quote Link to comment Share on other sites More sharing options...
farmer58za Posted August 13, 2020 Author Report Share Posted August 13, 2020 Thanks for the info! I will post with the GRA Regards Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.