General Trials Talk

HEY EVERYBODY RUNNING 80-1 AND PLUG IS WET ALMOST LIKE ITS RICH. IS THIS NORMAL?

For those that are interested There is a Dellorto carb service and tuning manual available for a small fee at www.carburetor-manual.com ,I got it last nite and learned all kinds of good info on dellorto carbs , Now to apply what I've learned to the trusty Fantic !!!! Glenn

hi just wondering does anyone know where the north derbyshire youth motorcycle club allsop cup is held tomorow?? as i was finking of going but dont know where it is cheers coxy

hi there i placed a post on last week about 2 storke wiring i now know its a pvl system dose any one know about this system or any firms who deral with kind regards wayne

Hello all, new here. I have a random request but I wondered if anyone was travelling to the trial this weekend and would be willing to bring a bike back for me? Thanks Justin

Hi guys It's all to common to here of company after company delivering bad service. After a mention on here I sent some ajs stormer/villers parts to have some work done by Nametab engineering. I phoned Simon Bateman up on monday to ask if he had recieved my bits, to which he said yes however he was going away tuesday for 10 days (oh bugger). He was very apologetic and explained that he had to much work on to do it that day...........I recieved the bits back on wednesday!!!! Not only that but its some of the best work i have ever seen done!!! Simon must of pulled out all the stops for me and I am a first time customer who he does not even know.......he could not of e…

thinking about chooping in my 125 scorpa 4t for something with a little more section performance and poke, i really like the hasssle free nature of the little air cooled unit but just want to change to a more trials specific machine, not sure weather to go for something like the scorpa 160/200 air cooled 4t or beta 200 2t or would i be better just gettimg a 250 either 2t or 4t or will these be way more powerfull than what i'm used to??? any thoughts would be good

hi, i have an 05 125 gasgas and i am replacing the seals and plates in it. please could you tell me how to bleed the clutch? i don't have a bleed kit. thanks alot Chris

I fancy a set of those control footpegs for my scorpa, but i don't know who sells them??? Anyone know where i can get some in the U.K.

A message for erwan29 - please empty your message inbox, I am trying to contact you and need urgent reply!

Well iv just treated myself to the dvd and i wasnt impressed he does his stuff while some bloke is reading from a book it doesnt go into the timing of the manoeuvres i found it really poor thought he would have done a good dvd iv learnt miles more off youtube for free

Hi All, When cleaning the rear brake (2021 braktec) and I've clearly got some air in the system when pushing the brake pots\pistons back in as the brake now doesn't work at all. I've taken the brake off the bike, reverse bled (several times to make sure all the air is out, hung the reservoir up high, tapped the line etc) but now only one pot\piston comes out when I put the brake on (off the bike still). I assume that I've unaligned the pot\piston when pushing it back in, and that's why it's stuck. I also assume the solution is to take the caliper apart, pull the pot out, put it back in straight and re-bleed? Any tips or idea…

Urgent request please, are there any brits going down to do this trial who could possibly bring a bike back for me ,obviously for a suitable fee ? thanks .

Any recommended carberation changes when running the arrow exhaust with a 2017 4T. Bike has been running great but have notice on a couple of occasions that the bike seems a little choked at full revs...cheers!

I've just popped a new air filter into my Sherco as part of its wash and brush up. The old one was pretty dreadful. It's my first time oiling and installing one. These bikes have a frame to mount the filter on, so I'm fairly confident I've done it correctly, but it's hard to be certain. Removal was a real pain as it's so small inside the airbox, in my frustration, I didn't note the orientation. I would like to be sure that I've installed it correctly. It's a Twin Air and there is a single seam at the top on my install (shown in pic). It's on the frame and clipped in. Looks OK, but I can't see the underside. Pic attached. Does this look right, with the…

I ordered a Mikuni Carburetor for my vintage bike from Pro-Flo at the end of March. They told me they were expecting a shipment in and that I would have my carb by April 6. Well, it is now April 23 and I have yet to see a carburetor arrive at my house. I have called them 3x in the past 2 weeks and sent them one email. They have yet to return any of them. Has anyone else had trouble with these guys? I advise everyone to stay away from them!

later this month neonsurge and myself are going to the james lampkin training day , is anyone else going , or know of a decent <mention of this company is not permitted on Trials Central> or pub that is bike friendly as in a big garage and that serves goooood breakfast ...oh yes and is well stocked up on JD for neonsurge

Do any of you know if there is a good trials dealer in Bologna (Italy), I am here for a few day's and would be interested to take a look, thanks,

Still here, just crossed the 1yr mark with this tractor.

I am in the process of building a bantam trials and would like to fit a Drayton tear drop shaped tank does anyone have one they want to sell cheers