Everything posted by supermotodaz
-
Ti Pipes- Short Or Long
Just wondered who,s had first hand experience of using the s3 titanium pipes and who has used what length pipe on a 290 sherco, i know long is smoother power delivery for the 250-290 and short is meant to be for the 125 but have heard the top riders use the short pipe on the bigger bikes . What sort of differance does it make using either length on a 290 sherco or 280 gas gas . Cheer,s Daz
-
Removing Crank Nut
Cheer, for advice i,ll have a go later today.
-
Removing Crank Nut
Need to do mains on a 2000 290 i just picked up, i,ve undone flywheel nut by holding oposing crankshaft nut but how can i undo this nut, is it only poss with a clutch holding tool or is there another proven method i can use, another question whats the best way to decoke the downpipe, this one,s full of crap, looks like its been ran way to rich. Cheer,s Daz
-
Premix Question
Thanks for the advice guys, 80:1 it is then.
-
Premix Question
Im just changing from motul fully to semi synthetic Ipone oil, normally mix 80:1, would i still use the same ratio for a semi oil, i know Sherco and other manufacturers all recommend certain brands of oils for there own reasons and a mix of around 60:1 in the case of Sherco but i assume all manufacturers will always air on the side of caution when it comes to giving advice. Cheer,s Daz
-
Excesive Clutch Noise
Just spoke to importer who said this is normal, some models worse than others but nothing to worry about.
-
Excesive Clutch Noise
Just rebult a 03 txt pro, and got it running today for the first time, had trouble bleeding the clutch but i think i,m there now, but i seem to have excesive noise coming from the clutch, i,m assuming this because as soon as i pull in the lever the noise go,s and the engine sounds sweet. I,ve just wiped of the side clutch cover expecting to see something loose or obvious, bearing looks o.k but thats as far as i have got so far, not removed the clutch itself yet, any ideas as to what may cause this noise. Cheer,s Daz
-
Oil Ratio
Cheer,s for info, ran on 80:1 today and it ran sweet.
-
New To The Sport
Whats involved join a club then apply for licience or is trials different, got supermoto acu racing licience
-
New To The Sport
Hi Mate Isn,t there a Leatherhead club as well ,seem to remember them running stuff boxhill years ago
-
Oil Ratio
e Thanks for that ,realise after looking through the forum its been asked more than once, just surprised how many different answers there are on looking.
-
New To The Sport
Hi Folks After racing and being heavily involed in Supermoto for the past few years, just got into trials through a mate and i,m now hooked, the cost for starters is a bonus compared to what i been used to, but its great fun,gonna give it a few more weeks and then have a go at competition level, novice i guess, whats club would you recomend me joining, live in Dorking, Surrey, do you need a licience for one off events or can you get a day one to try it out and just turn up. Cheer,s Daz
-
Oil Ratio
Hi Just got into trials , got a 250 07 sherco need help on the correct amount of oil / petrol mix required, been told between 70ml - 80ml per 5 lts of fuel, does this sound correct, or what would you guys recomend and also fully or semi, again recomendations would be apreciated, been a long time sinse i had two strokes. Cheer,s Daz