[Sherco 250 2008 Frame And Engine No.]

I had a look around and i found a complete side stand for a sherco. The only problem is that it says I need three 20mm and one 12mm but i have only got 3 tapped holes. Here is the link to the side stand. www.splatshop.co.uk/sherco-side-stand-complete.html

According to splat shop if you click on the bracket they sell it didn't change from 1999 to 2010, mine had 2x20mm and 1x12 closest to the engine,, i took a picture but i cant find an option to upload your own photos in replies.

[2004 Sherco Swingarm Removal]

The brake line is not easily removed from inside the swingarm, when I remove my swingarm for regreasing I take the whole brake system off the bike at the same time to avoid needing to disconnect the lines & go through the grief of trying to bleed the rear caliper

Thanks for the reply, but the reason i'm removing it is to replace the arm itself because one of the cam lugs has broken, so i'm replacing it with a used arm i sourced.

[2004 Sherco Swingarm Removal]

Hi,

Trying to remove the swingarm, after disconnecting the brake line from the caliper realised it won't go through the cavity of the arm?

Someone tell me what i'm doing wrong please.

Thanks.