Jump to content

Art

Members
  • Posts

    29
  • Joined

  • Last visited

Posts posted by Art
 
 
  1. Can some one tell me on the 72 Alpina the fill hole that's almost under carb what is that for? And on the right side of motor is that the gear oil side?? And what do I use for gear oil and is that fill hole that's under care is that for transmission? Thanks

  2. Ok I have owned dirt bikes threewheelers four wheelers my hole life, no I'm not taking off in too high of a gear, yes u can push bike with it in gear and clutch pulled in, no brakes r not locked. This is the first bultaco I have ever owned, somebody took it to the scrap yard one of my friends works at so I got it took it home got it firing,  it took me about a month to figure out why it wasn't cranking up thanks to the help of someone on here I grounded it to where coil is and it fired up I cleaned carb anywsy in bout three days I had it idling reving up it runs like a champ until I put it in gear 1st gear let out on clutch just like I'm suppose to and it just boggs out and goes dead . How can it idle, and rev up so good then bog out and go dead when I just barely start to take off? Now I am having some trouble with throttle cable that might have some thing to do with it I feel like some how it is, maybe i don't have some thing just right with the throttle cable

  3. Ok I have owned dirt bikes threewheelers four wheelers my hole life, no I'm not taking off in too high of a gear, yes u can push bike with it in gear and clutch pulled in, no brakes r not locked. This is the first bultaco I have ever owned, somebody took it to the scrap yard one of my friends works at so I got it took it home got it firing,  it took me about a month to figure out why it wasn't cranking up thanks to the help of someone on here I grounded it to where coil is and it fired up I cleaned carb anywsy in bout three days I had it idling reving up it runs like a champ until I put it in gear 1st gear let out on clutch just like I'm suppose to and it just boggs out and goes dead . How can it idle, and rev up so good then bog out and go dead when I just barely start to take off? Now I am having some trouble with throttle cable that might have some thing to do with it I feel like some how it is, maybe i don't have some thing just right with the throttle cable

  4. Can some one please tell me why my alpina 250 will sit and idle and rev up good but soon as u put it in gear let out on clutch it just bogs out and goes dead? Thanks any suggestions please

  5. Ok I took green wire grounded to coil bolt and it fired up! First time i ever heard it run... any suggestions what i need to do now? It fired up for a second with starting fluid and it sounds like it is reved up

    • Like 1
  6. Can anybody tell me if my wiring might be the cause of not cranking up? Ok black, yellow, and green r coming out of motor. When I got this bike there was no switches on it at all, no kill switch no headlight switch and no wires to tail light. Green coming from motor I got hooked to green wire that runs to that little grounding place under seat, black wire coming from motor I got hooked to coil wire and the yellow I got hooked to nothing. What is the two wires running from grounding place under seat? 

  7. Well they ain't getting hot cause I can't get it started..I put new spark plug, cleaned points, took carb off cleaned it and I can spray starting fluid in it and it don't even try to start any suggestions? Do u think the motor might be bad?

  8. When I try to start it, it don't eventry to start not even with starting fluid I cleaned spark plug and points but still nothing? Anybody got any suggestions I would sure begrateful I'll post couple of pics

    20180628_194327.jpg

    20180628_194436.jpg

  9. Can somebody give me some advice or whati could possibly do to get my bultaco alpina 250 to start up? Im getting spark and gas comes out of plunger on carb but I can put starting fluid in it and it still won't even try to start.. please help thanks art

 
×
  • Create New...