Does anybody know what the thread is of a Fantic fuel tap?

I have a cunning plan and just wanted to know BEFORE i bought one.

Cos i'm tight and dont want to waste me money

buy one from steve goode, they are not expensive

Lee

:agree:

Thats who i was going to buy from but i would have liked to know the thread first as if i cant get an adaptor then i will have wasted the money and will have to put it on e bay.

M16 x 1.0 (very fine) left hand thread, although the fuel tap should come with the adapter collar to convert from the lht of the tap to the right hand thread of the tank.

Thanks. At least that saves me money :agree:

You see what i have is a tank with a female M12 x 1.5 thread and the only fuel tap i couls get is a straight one which sticks too far down. What i wanted was a 90 deg tap that would tuck the fuel pipe out the way so i thought a Fantic one plus a male male nipple would do the trick.

Would but i cant get a male M12 x 1.5 to M16 x 1.0 oh well anothe cunning plan bites the dust

Thanks for the advice anyway.