racman Posted March 20, 2009 Report Share Posted March 20, 2009 Hello iam new to the forum and hope to get some advice abut my ty 250 s mono.I bought the bike as a runner but it would only run for 5 mins then the spark would disapear and then start again after cooling down.I took the cover off and the flywheel to dicover water in and around the stator[quite alot of water]there is damage around the casing where someone has forced the flywheel off [this is where the water is getting in ]my quetion is will i have to replace both the source coil and the pickup coil and where is the best place to get them and will water have got into the crankcase . Hope you can help Quote Link to comment Share on other sites More sharing options...
stork955 Posted March 20, 2009 Report Share Posted March 20, 2009 Gday, sounds more like a trigger but it would be best to test them both to see which one is at fault. Use a standard multimeter set to AC volts, use a 10 volt scale for the trigger (pulser/pickup) and 100 volt scale for the stator. HTH, Stork Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.