No theres only wheel spacers which fit in the bearings and

there both there, did try using a washer but it did the

same, then when i removed the bolt and cam from the brake

side you could see the mark that the spindle had made.

which ment everything is tigtening up to the spindle but

that isnt enough to tighten the wheel in the swinging arm

jsp

let me check

With the new rear bearing kit the alxe length is maybe 1mm too long. Simply shave 1mm off the end of the axle or grind and you will find no issue.

cheers

thanks for the info everybody, i will get it sorted

and keep an eye on it

jsp