hugh_b Posted May 1, 2012 Share Posted May 1, 2012 Fitted some raptor pegs this evening, on one side the spring sits on top of the hanger, on the other side it sits within. Will this be ok or could it gradually wear the hanger away? Quote Link to comment Share on other sites More sharing options...
mik60ish Posted May 1, 2012 Share Posted May 1, 2012 You don't say which bike, but when I transferred my Raptors from my 07 GG TXT Pro to my 2011 GG the springs didn't fit! So I used the original GG footrest springs and it was all good. Quote Link to comment Share on other sites More sharing options...
hugh_b Posted May 1, 2012 Author Share Posted May 1, 2012 apologies, it's on a 2011 beta evo. I found it strange as one side fits fine! Quote Link to comment Share on other sites More sharing options...
axulsuv Posted May 1, 2012 Share Posted May 1, 2012 Are you missing a bushing inside the spring ? Quote Link to comment Share on other sites More sharing options...
hugh_b Posted May 2, 2012 Author Share Posted May 2, 2012 no it's all there. I did have a look at some pics of the ttt bikes and they all seem to be the same on this side! Quote Link to comment Share on other sites More sharing options...
pindie Posted May 2, 2012 Share Posted May 2, 2012 Have you got the spring the right way round? At a guess it should be opposite to the side thats right. My rev 3 cam with loose springs after the previous owner kept his nice pegs. This meant I had to work it out but got there in the end and got the springs and pege tight and in the right place. Quote Link to comment Share on other sites More sharing options...
hugh_b Posted May 2, 2012 Author Share Posted May 2, 2012 yeah all in the right way. Spoke to raptor ti today, very helpful chap and he's sorted the problem with some longer springs. Great customer service. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.