Ive just had my hub back from the powder coaters and it's ready to be sent to be spoked. But I can't remember which way the concaved spoked flange part of the hub attatches to the conical drum. Does it attatch with the concave going outwards facing the forks i.e. bottom and smallest part of the concave closest the hub or inwards facing the drum i.e. bottom and smallest part of the concave closest the forks ? Your help would be most appreciated. Thanks.

Edited December 19, 201213 yr by gazzaecowarrior

Hi

Its the first way you describe, one question where did you get your spokes and how much where they?

James

Jimbo. Thanks for that. Must learn to take photos before stripping down. I live in Cardiff and there is a guy locally who is doing both wheels for £130 including parts and labour. The spokes will be galvanised not stainless. I took the wheels to him before I stripped them and he measured the spokes so I don't know what size they are.

Jimbo. You couldn't post a photo of your hub could you so there is no confusion. No worries if you cant.