Hi

Can anyone remember which way round the Cota 247 piston is assembled ?

Long or short skirt to the front ?

Thanks in anticipation.

Regards

Sparks2

i would expect long skirt to go to front exhuast side you could try it in and see where the ring gaps end up they dont want to pass passed the exhaust port ,,, does it have any windows in it

Edited April 16, 201313 yr by zerorev3rev4

Hi

Thanks for your reply zerorev3rev4

The pegs will miss the ports either way round.

The transfer cutouts are symetrical, so again, will work either way.

However, the consensus, is that the longer skirt should be to the front, just as you say.

Thanks again.

Regards

Sparks2

Edited April 17, 201313 yr by sparks2