penno350 Report post Posted March 4, 2014 Morning all. Physically fitted but no spark, could anyone please confirm for me stator connections to ignition unit (spade connectors) for blue and black leads. Also I have timed it at 5 degrees BTDC using the mark on the rotor with the closest mark on the stator. Apologies for really simple questions but didn't get any instructions with the system. Thanks. Quote Share this post Link to post Share on other sites
penno350 Report post Posted March 4, 2014 (edited) Sorted the spade connectors as they are different sizes (should have gone to specsavers). Did a bit of googling and it seems to suggest that plug choice is critical, PVL doesn't like a standard plug? Should I be able to see a spark with the plug sitting on the head? Edited March 4, 2014 by penno350 Quote Share this post Link to post Share on other sites
penno350 Report post Posted March 4, 2014 All sorted and running, thanks for the help :-) Quote Share this post Link to post Share on other sites
bashplate Report post Posted March 5, 2014 Nice one Penno. Sometimes just voicing your thoughts helps clear your mind.....result, you find your own annswer. Quote Share this post Link to post Share on other sites
sickswan Report post Posted February 18, 2015 Any info on what plug to use as I'm about to install my pvl from sammy miller also 5 degrees before top dead is that the point you line up the line on the rotor an stator? Instructions left alot to be desired!!! Quote Share this post Link to post Share on other sites