How do I get the clutch arm out? I can only turn the adjuster so far then it stops. I’m assuming it is still engaged in the arms shaft. Any help would be appreciated.

You unscrew the clutch arm adjusting screw which is located in front of the sprocket

Tried that. It goes a half turn or so then stops, both directions.I don’t want to break it.

Wiggle the clutch arm while you are trying to turn the clutch arm adjusting screw anti-clockwise. There may be a burr on the peg on the adjusting screw that is catching. If you are in doubt about what I'm saying, have a look at a parts diagram and you should be able to see how it works

Thanks, I’ll try that tomorrow.

Thanks feetupfun, just had some corrosion in there. All is good.