krisbgasgas

i may have sorted the problem. one of the jets in the carb is only a 40 and needs to be a 48 for the gas gas

i've had the casing off and i dont think there is a flywheel weight on there. i've changed the e clip on the throttle needle to 2nd from the bottom nad its made it a little better. if i do the bottom or middle clip it is quite rough when applying the throttle it bogs down likes its trying to die. The air screww is 2 1/2 turns out aswell.

I'm just tackling a little niggle i have with the bike. When i rev the bike the revs slowly die down. I'm thinking in the back of my mind that the bike is running too lean. I'm going to try dropping the needle clip down 1 to see if this makes a difference. BTW the bike has a Keihin carb fitted.

welcome mate. if you fancy a day out in a small place to practice in thurlstone nr you give me a shout, i will be there tomorrow afternoon.

thanks mate, i'm going to join the darwen club this weekend, and i used to be in the falcons one so will pop over to that one aswell. thanks for the list of clubs, very much appreciated Kris

welcome mate, enjoy the sherco and have fun

Welcome mate, theres a fair few places to practice over yorkshire way, there a few that are kept hush hush in barnsley

Evening all, im finally getting back in to trias after being away for 8 years, having moved from yorkshire i dont know any where or anyone in to trials around where i live (lower darwen) I used to own a Gas Gas TXT2000 280 but i have now been out and bought a TXT Pro 280 to play with Hope to see some of you guys out on the bikes. Kris