spalado

I live in Thailand. Don't have Putoline and GRO.

How about Motul 75w-80 ???

Hello all, I use GG txt pro 2011 280. I want to change engine oil& front fork (Marzocchi 40mm) Which Engine oil is better ? (in my area not have ATF type F) 1.Valvoline ATF dex3/mercon 2.BESCo transaxle 5w-30 (for munaul gear ISUZU pick-up) 3.Motul H-tech 100%syntetic sae 5w-30 (car engine oil) And,Front fork oil for Marzocchi 2011 in manual ( 5wt but in GG us (http://www.trialspartsusa.com/tech.html) recommend 7.5wt . Which one is better 5wt /7.5 wt ? regard

Hello everybody My swing arm sherco'07 2.9 was broken. I want to know swing arm sherco '05 can fit with my 07 bike??? I can't find second hand swing arm '07. regard.

Hi all, My sherco 2.9 '07 was change Carb to Keihin pwk28. (My country temp 25-35 C) Main 122 pilot 45 needle JJH(3th clip from bottom) air screw 1 new spark plug#6 Pls help me analyze about Carb setting. Thanks. This pic after first test.(short practice 3 hrs .)

My sherco 290 2007 IGN COIL no spark while radiator Fan is Rotating when kick start the bike Leonelli Stator(sherco part M397) Leonelli CDI & IGN COIL (sherco part M398) Stator Test @ room temp 30 ํc spec -----> measurement (installed) Blue no reading (sometimes shown as 1 or error)----->1 OK Brown 1000 to 1600 ----->908 Black 1050 to 1650 ----->911 Using the leads the other way around i.e. black lead to the coloured wires, red to earth. Blue 600 to 730 ----->587 Brown 650 to 770 ----->613 Black 650 to 770 ----->610 Also test the resistance's of the other coil wires, leads either way around. White to red 50-100 ohms ----->89 Red to green 450-550 ohms ----->555 Green to white 540-640 ohms----->609 when kick start (From stator) RED-Green(From stator) ----->12-14 VAC Whit-Green(From stator) ----->12-14 VAC All ground is OK. resistance's of IGN COIL& CDI BOX spark plug ----->1557ohms wire IGN coil- ground----->1317ohms spark plug-ground ----->8.45 k.ohms I'm not sure about result becuase high room temp. pls. help me 1.analyze stator. 2.How to measure the IGN COIL & CDI ? 3.Can I have wiring diagram of sherco 290 2007 ?

Pls help me analyze the reason of strange noise of engine. thk you