[Rev3 Not Firing]

Clened up the stator coils and magneto. Ran a new ground to motor mounts from cdi. Starts second kick cold.

[Rev3 Not Firing]

So I'm thinking it needs a stator. I'll check the resistance. Sparks ok with a plug against the head, but when hooked up to a spark tester it was very weak. Anyone reading these ramblings have any thoughts?

[Rev3 Not Firing]

So here's the stator, seems OK I think. Not sure about the copper plate on the coil top right in the pic though. It looks like its been rubbing.

[Rev3 Not Firing]

Got the puller and seal while I have it apart. Anything to watch for on these bikes? My first beta

[Rev3 Not Firing]

It broke a bit of the cover off where the chain guard meets the cover. Gonna silicone the new one up, maybe drill a drain hose too, idk.

[Rev3 Not Firing]

Trying to order a flywheel puller and some things. Hopefully it is just the timing. Bikes had a few quwerks since I got it.

[Rev3 Not Firing]

Just noticed there is a chunk of the ignition cover missing and signs that water has gotten inside

[Rev3 Not Firing]

I might have deleted the thread I started earlier. Trying to figure out why my 2001 rev3 won't fire. Has decent spark, new top end, carb tangs set low with little movement. 80:1 94 octane with stabilizer. The addict suggested maybe a woodruff key, so I'm about to check that out. Killing me that it won't start