Jump to content

Bob Davies

Members
  • Posts

    6
  • Joined

  • Last visited

Everything posted by Bob Davies
 
 
  1. Thanks for the info, I’ve tried them but no joy so far.
  2. I’ve tried that and they are M4 7mm and they informed me that they are rare and only specialist use only.
  3. Hi everyone, I’m hoping someone can help me here. I’m restoring a 1980 MH349 Cota and I need a set of 7mm hex drive countersink screws for the engine case. I’m struggling here been trawling the net and the best I can find is a used set in the USA for extortionate money. Thanks guys.
  4. Thanks Sparkieb for the info I'll leave them off. many thanks
  5. Thanks for that delberto but mine is a different configuration, the 3 little springs just hook onto the outer lugged plate some how and are fully exposed not in a recessed hole like that one.
  6. Hi Guys looking for a little assistance, took the clutch apart as Im overhauling a 349 Montesa circa 1980 and I'm having difficulty putting the 3 little clutch springs back. I know I should have taken a photo first before removing them but I forgot, is there a set up to reinstalling the clutch
 
×
  • Create New...