Jump to content

dobbin22

Members
 View Profile  See their activity

  • Posts

    5

  • Joined

  • Last visited

 Content Type 

Posts posted by dobbin22
 
 

  2. TL250 clutch friction plates

    in Honda

    Posted

    1975 TL250 clutch friction plates - 22201-286-010 and 222-286-000 part numbers. (One part number appears to have replaced the other).

    I'm replacing the friction plates. The part number I ordered, 22201-286-010 is not as wide as the plates in my clutch.

    The originals are 11.40mm while the replacement plates (22201-286-010} are 9.30mm

    Anyone changed out their original friction plates for new ones? And what part number did you use?

    I can put them in and give them a try, but I'm loosing friction surface. Which will probably translate into less clutch grip.

    I appreciate some ideas from those who've changed their clutch plates. Thanks.

    Regards, Dobbin22

     

    clutch fricton plates.jpg

  4. Honda TL250 Trials - new clutch?

    in Classic Trials

    Posted

    - Honda 1976 TL250 Trials - new clutch?

    I've had the bike a few years, but ridden it very little. It came with piston slap, valve problems and other issues.

    Enough so that power is pretty weak. So I'm overhauling the engine. But because I've ridden it so little I'm not sure about the clutch.

    Mostly likely I'll just replace it. (The clutch pack was sticking when I purchased the bike).

     

    I'd like to hear from an TL250 owner. Seems to me (as the bike is geared so low) that with the clutch out, and enough throttle the front wheel ought to come right off the ground.

    Sound about right? 

    Thanks, Dobbin22

     

  5. TL250 Honda - engine torques

    in Honda

    Posted

    1975 Honda TL250 - Where is the best place/manual to find engine torques for engine reassembly? The manual I have is not that specific.

    The "bolt" torque (e.g., 10mm) is given, but torque by location would be more useful. (Like cylinder-head-to-crankcase bolts). 

    Although, I can get by with the manual I have. Thanks.

 
×
  • Create New...