davidhiggins

.

Hi all dont know much about Yamaha ty250 trials bikes could you please let me know which is the best model to buy as an investment and to ride, ty250s, ty250r, pinky or are there any other air cooled models. regards David

Thanks for the info regards David

Hi the fantic 200 I have is a rear kick model Do both yokes need to be changed . One other question is the flywheel nut on a 200 left or right hand thread Thanks David

Hi all someone may be able to help. I have a Fantic 200 (1982) with different yokes to a friend of mine, the yokes on my bike set the handle bars back towards the petrol tank while on my mates bike they are probably 3/4 inch further forward.Both sets of yokes have two pinch bolts to secure them to the stantions. After riding both bikes I prefer the riding position on my mates bike so would like to change mine the question is where can I get a pair of yokes that set the bars to the front of the bike and did fantic produce two fantic 200 with different front ends. Also my mates 200 has a different cylinder head this I believe raises the compression, was this mod a works mod. Does it make them run better if so where can I buy a head. Thanks for your help Regards David

Thanks for information Ill check all the settings, it gives me a good starting point. Regards David

Hi the bike is a back kick Minarelli engine Thanks David

Hello celine gasgas the Fantic 200 is a 1982(november) Any information would be appreciated,Thanks for the reply kind regards David

Hello all I just bought a 200 Fantic and I'm planning to rebuild it. It does run but when you set off it is flat at the bottom end. Maybe sucking air or something. Is there anywhere on the web where I can get workshop manuals ?? If not I need the following info to get started:- 2 stroke oil type Engine oil type Fork oil type Sparkplug type Specs for Carb inc needle settings and jet sizes etc.. Don't worry there will be much more when I get round to it Thanks in advance David

Hi all I'm David from Clitheroe England and I just bought a 200 Fantic that I'm going to rebuild. Need lot's of help and info..