Hi, should the rear axle have a sleeve/spacer inside the hub between the wheel bearings and if so are the available any where or does any on know the size?
Thanks for all the info, unfortunately I wont be able to ride for a couple of weeks but will update when I have had a chance to try some new jets and settings
I have fitted a Mikuni VM26-8074 to my MK2 MAR this came with 190 main and 50 pilot I have now fitted a 150 main and 30 pilot and it is running ok but the throttle response at low to 1/4 throttle is still not right, as the main and pilot were to large I was wondering what the Air Jet size should be, the one fitted appears to be 0.5 but it is very hard to read
Hi, Does anyone have a recomendation for Black Exhaust paint for the middle box and silencer on a MAR, most of the exhausts paints seem to be Matt and I was trying to match the original gloss
Hi Bill, Thanks for your reply, I was leaning toward the Canon 6D due to its low light advantage over the 7 or 70D, I had not considered the 5D II so I will investigate that as well
Ossa MAR MK2 rear axle sleeve
in OSSA
Posted
Hi, should the rear axle have a sleeve/spacer inside the hub between the wheel bearings and if so are the available any where or does any on know the size?