geordabroad Posted October 28, 2008 Report Share Posted October 28, 2008 Hello, my carb stuck open on my '06 TXT Pro 300. It revved flat out for around 10 secs until the petrol ran out (I'd turned it off). I've started working through ther bike to see why it wouldn't start immediately afterwards and find there is no spark. It used to start first or second kick. It has a Kokusan ignition. Can anyone tell me what I am likely to have damaged? Should I get a new coil, a new Ignition control module, voltage regulator? or may I have done something to the Ignition stator assembly? How can I check what might be broken? Keen but confused in Beijing Quote Link to comment Share on other sites More sharing options...
cynical Posted October 28, 2008 Report Share Posted October 28, 2008 Sounds like you severed the woodruff key on the flywheel, hope you didn't bend the crank too. Check it out, if it starts after the woodruff key repair but wont run properly, maybe it's sucking in air from the deformed crank seals behind the flywheel. Oh Brother, new crank !!! Good luck Quote Link to comment Share on other sites More sharing options...
ham2 Posted October 29, 2008 Report Share Posted October 29, 2008 This happened to me once..I had permanently depressed the kill switch in a panic. Check it 1st before you spend any money on parts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.