honda pants Posted May 13, 2009 Report Share Posted May 13, 2009 Anyone done this mod , i am attempting to fit a set of Fantic fork clamps to my Tiger Cub headstock.Any bearing numbers would be great, Cheers Chaps Quote Link to comment Share on other sites More sharing options...
alan Posted May 14, 2009 Report Share Posted May 14, 2009 i think you will find that the triumph frame bearing housing is a totally non-standard imperial size. your options are to fit adapotors into the frame to accept a metric bearing. The bearings will be further apart so you will need a longer spindle than the original triumph one and you need to watch the ride height as the top yoke will be higher than before. alternatively you could weld the fantic headstock to the triumph frame, losing a couple of degress rake at the same time. Quote Link to comment Share on other sites More sharing options...
honda pants Posted May 15, 2009 Author Report Share Posted May 15, 2009 Alan, thank you for taking the time to explain things for me....Top Man Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.