jonny5 Posted August 10, 2009 Report Share Posted August 10, 2009 Alright guys, I've got a 06 beta 250 and want to upgrade the carb,what reeds would be the best or what carb would be better to fit? Quote Link to comment Share on other sites More sharing options...
the addict Posted August 10, 2009 Report Share Posted August 10, 2009 Set the carb up right and stick Boyesens in her, you can buy them from Motormerlin on Ebay no probs. The Dellorto is a mega carb on the rev3 but needs constant cleaning, if you dont mind carb cleaning go for that,if not stick with the leaky junk called the Mukuni Quote Link to comment Share on other sites More sharing options...
stork955 Posted August 10, 2009 Report Share Posted August 10, 2009 Gday, yeah stick with the Mikuni. Any carb will leak when its upside-down. There is no horsepower to be gained by merely swapping carb brands and you have to go through the pain of getting it set up. If you are looking for performance clean the exhaust pipe out. Cheers, Stork Quote Link to comment Share on other sites More sharing options...
jonny5 Posted August 11, 2009 Author Report Share Posted August 11, 2009 cheers guys, would i be able to do that my self or would it need a pro 2 set up the carb? i can re pack the exhaust piece of p***,does that make a big difference to performance? Quote Link to comment Share on other sites More sharing options...
the addict Posted August 11, 2009 Report Share Posted August 11, 2009 repacking makes a bit difference if the original is ****ed. Theres a post on the Beta forum (sticky I think) about the Mukuni, there should be pics in there and settings for you to follow Quote Link to comment Share on other sites More sharing options...
stork955 Posted August 11, 2009 Report Share Posted August 11, 2009 Gday, have a look at the engine pipe as well. Most people forget these... I have seen them so blocked you could barely get a garden hose through the pipe. there are many posts on cleaning these out, do a search and you will find what you need. Cheers, Stork Quote Link to comment Share on other sites More sharing options...
gixxer7500_0 Posted August 11, 2009 Report Share Posted August 11, 2009 Hi I had an epiphany one night and looked at the 08 rev3 28mm carb and looked at my old 07 26mm carb and thought why not just bore it out because all carbs are made the same the only diference is the bore size .So anyway i stuck it in a lathe got it centerd and just drilled it out to 28mm .The carb didnt even need jetting and has more on/off/on/off power now and the job was well eary when the carb was stripped !! if you want a pic of it being done e-mail me chris@heyes101.fsnet.co.uk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.