jedipaj Posted October 27, 2009 Report Share Posted October 27, 2009 please can anyone tell me how much gear oil i need to put into a sherco 2004 125cc after i have drained it as i cant see a window. Thanks Quote Link to comment Share on other sites More sharing options...
theshercorider Posted October 27, 2009 Report Share Posted October 27, 2009 (edited) 450ml Edited October 27, 2009 by TheShercoRider Quote Link to comment Share on other sites More sharing options...
copemech Posted October 28, 2009 Report Share Posted October 28, 2009 I have found this process goes better and quicker if you warm the bike so the oil gets flowing, and lean it way over to about a 45 degree angle to drain fairly straight out and not make a big mess on the skidpan and the oil will track nicely into a small, cut down 2L pop bottle! I lay it WAY over to the point the bar end is at knee height and supported, but it does make me have to kinda slide in under the bike to remove the screw and find proper placement for the cup. No big deal really, as makes much less mess in the shed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.