Jump to content

Tiger Cub Gearing


duckwizard
 Share

Recommended Posts

I see that some of you have fitted 16T Primary duplex sprocket.

How does this compare to the standard 19T.

I was going to leave my standard primary at 19T and fit the following

13t Gearbox

64t Rear sprocket

420 chain.

What do you think.

Link to comment
Share on other sites

 

 

If i use the 16 T primary.

What sprockets do you guys reccomend using.

Bearing in mind the 64 may get snagged.

I have at present 17T front and 58 T rear will this be ok.

Save me some cash, as these are all relatively new.

Link to comment
Share on other sites

 

One advantage of using a 13T gearbox sprocket is that it gives more clearance for mud/leaves in that confined space. The previous owner of my cub had to strip the engine down because the gearbox sprocket seal was pushed in by debris causing bad oil leak!!

For comparison if you go (a)19x49, 16x58 as per standard trials cub the final ratio in 4th is 9.135.

(b)16x48,17x58 as you suggest it will be 10.23 final ratio in 4th.

©19x48, 13x64 as per your other option it will be 12.40 final ratio, bearing in mind all 1st ratio's are the same 16 mainshaft 29 layshaft. then the last option will give the lowest ratio.

:):(

its hot with this anorak on!!!!!!!

Link to comment
Share on other sites

 
  • 2 weeks later...
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...