Jump to content

ty80 trouble


bezerk
 Share

Recommended Posts

Hey all,

Looked for this on other posts, but nothing seems to cover this one... My boys old ty80 starts lovely, ticks over and revs perfectly... But when riding it bogs and stops, obviously when in gear, pull the clutch in, rev it through... all great again. Fuel fresh, carb and filter clean.

Any ideas anyone?

Link to comment
Share on other sites

 

Bezerk

obviously diagnosis at this distance its just guesses... however, here's a few.

  • At a basic level, bogging when the bike heats up spells rich mixture.. but....
  • Have you had the plug out immediately post bog (to see if its rich or lean)
  • Does it smoke heavily when its bogging (rich..carb float issues, does fuel leak out of the overflows)?
  • have you tried applying choke mid bog (if its weak, this will perk it up at low revs, if its already rich this will kill it completely)
  • Have you tried removing the fuel cap just in case the tank breather is blocked.
  • how far do you ride before it bogs (if its +5 mins it might be overheating.. ign timing)
  • Does the exhaust note sound strangled or muted (clogged exhaust... overheating)
  • have a look at the ignition timing marks.. are they correct
  • It could be a dodgy plug/coil electrics but this doesnt sound likely given the description. Generally these work or they dont.

So, some ideas there... good luck

Dom

Link to comment
Share on other sites

 
 

If bogging means the motor dies as the throttle is opened, it may be a blocked or partially blocked pilot jet (lean mixture as throttle opened).

dombush's choke test will test this possibility

Yup exactly what I was going to say - I have several TY80's and the pilot jets are forever blocking as they are soooo small and the tiniest bit of rust/dirt from the tank blocks em good and proper....

Link to comment
Share on other sites

 

Guys,

Thanks for the reply...

It doesn't bog or splutter until there is a load (ie, in gear and moving) then it behaves exactly as if it was a fuelling issue (it sound/feels perfect when ticking over or reving it up, even when I shake it around)

See why this one is a strange one?

Link to comment
Share on other sites

 
 
 
 

try riding it without the airfilter in,if it runs ok without the filter, then theres not enough air getting to the carb making the mixture rich whenyou put it under load

Done that one, but thanks for the thought... talked to a bloke at Gordon Farley today and he had the thought that it could be electrical condenser, points, as its occurring under load, fair point!, also we kinda agreed its unlikely to be a carb issue as it idles, revs cleanly whilst standing (though Im ruling nothing out )... thoughts?

Link to comment
Share on other sites

 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...