nosmokenopoke Posted April 18, 2011 Report Share Posted April 18, 2011 Hi Guys Just wondering if anybody has any words of wisdom before i go off to look at a 01 sherco 250 What i should look out for and considering it been in good reasonable condition considering its age what i should be looking to pay (roughly)?? Quote Link to comment Share on other sites More sharing options...
wingandaprayer Posted April 18, 2011 Report Share Posted April 18, 2011 HI, Check wheel bearings have no play in them, linkage bearings are ok by lifting rear of bike and feeling how much movement there is before rear wheel lifts from floor, there will always be a slight amount of play that you can feel but it shouldnt be much more than a few mm. check brakes work and there arnt any leaks or cracks in frame. Start bike and listen for rattles when clutch pulled in and make sure its the year the seller says it is. Good luck and if its all good you should pay between Quote Link to comment Share on other sites More sharing options...
bigman Posted April 19, 2011 Report Share Posted April 19, 2011 Basicaly everything that has been said, but I would say that Quote Link to comment Share on other sites More sharing options...
nosmokenopoke Posted April 19, 2011 Author Report Share Posted April 19, 2011 Cheers for the tips folks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.