charliechitlins Posted April 9, 2005 Report Share Posted April 9, 2005 Spray the inside of your airbox with some of that really sticky filter oil. If dirt gets past your filter, it has a good chance of getting stuck to the airbox instead of getting in the carb. Quote Link to comment Share on other sites More sharing options...
bigfoot Posted April 9, 2005 Report Share Posted April 9, 2005 Only problem with this one is that the airbox on most trials bikes is on the wrong side of the filter. i.e. the filter fits on to the neck of the carb. Quote Link to comment Share on other sites More sharing options...
gasgas Posted April 9, 2005 Report Share Posted April 9, 2005 i think that is the meaning Quote Link to comment Share on other sites More sharing options...
bob Posted April 9, 2005 Report Share Posted April 9, 2005 I read somewhere that you need to be careful when doing this as the oil can get drawn through into the carb which causes all sorts of silly problems. A good idea though, I do it, just do not use too much! Quote Link to comment Share on other sites More sharing options...
trials lad Posted April 9, 2005 Report Share Posted April 9, 2005 Only problem with this one is that the airbox on most trials bikes is on the wrong side of the filter. i.e. the filter fits on to the neck of the carb. Not on gas gas pro's I cant help but get oil all over the inside of the air box trying to do the poxy fiddley job of screwing the air filter on Quote Link to comment Share on other sites More sharing options...
junior_vet Posted April 10, 2005 Report Share Posted April 10, 2005 How do you clean the inside of the airbox after putting the oil in it? I have a Sherco and the holes into the airbox don't allow for much cleaning action through them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.