October 29, 201312 yr Hi, Trying to remove the swingarm, after disconnecting the brake line from the caliper realised it won't go through the cavity of the arm? Someone tell me what i'm doing wrong please. Thanks.
October 29, 201312 yr The brake line is not easily removed from inside the swingarm, when I remove my swingarm for regreasing I take the whole brake system off the bike at the same time to avoid needing to disconnect the lines & go through the grief of trying to bleed the rear caliper
October 29, 201312 yr Author The brake line is not easily removed from inside the swingarm, when I remove my swingarm for regreasing I take the whole brake system off the bike at the same time to avoid needing to disconnect the lines & go through the grief of trying to bleed the rear caliper Thanks for the reply, but the reason i'm removing it is to replace the arm itself because one of the cam lugs has broken, so i'm replacing it with a used arm i sourced.
October 30, 201312 yr Might be easier just to buy a new line & fit it to the new arm before fitting to the bike
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.